How to Choose a Smart Lock For Double Glazed Door
It's important to select locks that are smart and meet high security standards when you're shopping for double door locks. This includes being SS312 Diamond approved or at least Kitemarked to TS007 3 Star, which will prevent the lock from snapping.
Make sure your doors are prepared with bore holes prior to choosing a smart lock. You may need to install hinge bolts or an extra security measure if do not.
uPVC Door Locks
The majority of uPVC doors have an euro cylinder lock that is concealed within the handle and connects to a multi-lock system in the door frame. The issue with many older or cheap uPVC doors is that the lock are easily'snapped and'snapped', rendering the multi-lock system ineffective and allowing intruders access into your home. The best quality uPVC doors should be fitted with an euro cylinder that is resistant to snapping and is more difficult to tamper.
Multipoint locks are a popular choice for uPVC door as they provide more security than one cylinder. They are usually long and have multiple locking points in the frame and door to stop burglars from getting in through the unlocked part of the door.
If you are looking for a multipoint locking system for your uPVC doors, make sure to select a lock that is approved by the highest standards of security. The most secure locks are ones that have been certified to SS312 Diamond or at least Kitemarked according to TS007 3-Star. Both of these standards have tests to protect against lock snapping.
Keep your uPVC door locks lubricated using a product such as WD40 will help to increase their longevity and prevent the locking mechanism from becoming stiff or making the handle struggle when being used. This can be a sign that there is an issue with the internal springs which will require replacement or an indication that you're applying too much force when locking the door, as this can damage the mechanism.
If you are looking to replace your uPVC locks It is recommended that you speak with a professional locksmith who specializes in uPVC lock replacement. They can advise you on which lock is best for your door, and provide you a cost-effective quote. They can also repair damaged panels and replace handles.
A professional uPVC locksmith typically charges between PS35 and PS50 to replace your uPVC door locks. They will offer a comprehensive service that is fast efficient, reliable and will be completed to the highest standard. They will charge an additional fee if they need to rekey the locks or board windows that were broken into.
uPVC Euro Cylinder Locks
Cylinder locks (also called door barrels) are present in uPVC doors and connect to the multi-point locking system within the door frame. These locks are also found in the internal glazed doors and conservatories. They provide the highest level of security but are vulnerable to attacks like lock snapping or bumping. This is why it's important to always double lock your uPVC doors prior to retiring to bed or leaving your home.
Before you purchase, it is crucial to decide which cylinder lock is best suited to your requirements. For example, you should take into consideration the frequency you lock your uPVC door and whether you'd like a keyed-along system that allows all of your doors can be opened by the same key.
The most common type of cylinder lock is the euro cylinder which is found in most uPVC doors. They are typically made of brass and are available in different sizes to fit most doors. The largest models are generally used for the front and back doors on larger properties.
When choosing a euro cylinder it is crucial to confirm that it has been tested to the correct kitemark standard. These are SS312 Diamond Approved or TS 007 3 stars and offer protection against drilling, Picking, Bumping and Snapping.
Cylinder locks come in a variety of sizes and some can be offset, which means they are only locked from the inside after they are turned to the closed position by turning the handle upwards. It is also essential to consider how much you're willing to pay on a uPVC door lock, as the price will vary based on the security level you need and the features you want for the new cylinder.
It is crucial to measure the door before replacing a cylinder so that the new cylinder will be suitable for the door. To do this, first find the screw that fixes the cylinder usually a large headed screw that runs parallel to the lower portion of the cylinder and remove it. Then, locate the cylinder and measure the distance from the edge on the lock face to the centre of the screw hole. This is your measurement A. Measure from the edge of the door to the centre, including any furniture and this is your measurement B. Make sure you compare A and B to ensure that you have measured correctly.
uPVC Multipoint Locks
Multipoint locking systems are the most secure locks for uPVC and composite doors. These long strip locks are able to run across the length of your door and come with multiple bolts and hooks that lock in place when you operate the handle. These locks offer greater security for your home and are available in various styles to suit any door type or taste. uPVC Multipoint Locks can be found on the majority of composite and timber doors as well as new uPVC door types.
Contrary to Euro Cylinder locks which are susceptible to 'lock snapping' the multipoint lock is designed to stop this type of attack. The locking points of a multipoint lock are connected with a bar made from steel, which blocks the hooks from moving without removing the key.
Most new uPVC and composite doors will feature an anti-snap multipoint locking included as standard, however should you be concerned that yours might not then it's worth getting the lock checked by a local locksmith. You can determine the lock by opening the door, and looking at the metal strip that runs the length of the door. The most popular manufacturers are ERA, Avocet Fuhr, or Mila.
The process of turning the lock on is done by either using a lever on the lock, or turning the key a few times. Once all the locking points have been engaged you can then open and close the door using the handle and use the key to lock it - this throws out the deadbolt that is located in the middle of the gearbox, which is the most powerful locking mechanism.
When it comes to replacing your uPVC or composite front door lock it's always best to purchase from a reputable firm that specialises in windows and doors because the locks that are used on these products play a significant function in securing your home and your family. The purchase of a cheap replacement multipoint lock is a false economy when the security and locks level of your new doors don't meet the standards required. This will not only put your family members at risk, but could also impact your insurance premium too.
uPVC Rim Locks
There are several kinds of uPVC rim locks. The most basic one is a slam shut lock, when you close the door it will automatically lock, however you can also purchase an option that requires you to lock manually using the key before leaving the house. These locks aren't able to be pulled open and are among the most secure options you can fit to your door. These locks are suitable for wooden/timber doors on homes for domestic use, and glass panelled door for commercial buildings. You can even have these locks approved to the latest British standard BS3621 so that your insurance company will offer discounts on your insurance premium.
Multi-point locks are used on uPVC doors and composite doors. They are extremely secure and offer the highest security for your home. These locks are equipped with multiple locking points, so that if you attempt to force the handle open, it won't turn. The locks are also designed to make it difficult for burglars to get around the handles, so that they can't retract the latch from the outside.
They can be fitted with a mortice lock to provide additional security against break-ins through the window. simply click the following page are ideal for doors that open onto gardens or outbuildings, as they offer extra security from thieves who break through windows to gain entry.
If you're worried about your uPVC door or composite door snapping, we can install an anti-snap lock to stop this. We use them on our composite doors, and are the only uPVC installation company in Belvedere to provide this.
We can change your locks out of hours as we have a mobile vehicle that can be brought to your home. It's a little more expensive cost than when we're working during the daytime, but it's worth it for the ease and security of having your uPVC doors' locks changed outside of business hours.